Soda Ash Substitute

Soda Ash Substitute

  • Soda ash substitute to be used 1/5 to 1/8 of soda ash quantity depending upon the class of reactive dyes and thus reduces the cost of dyeing.
  • Soda ash substitute reduces effluent load and TDS by 60% , so formation of sledge is also reduced.
  • Soda ash substitute gives good exhaustion with good colour yield on cellulosics.
  • When compared to Soda Ash, unlevelling problem shall be minimized in tough shades.
  • Alkali addition can be done in single time, but in soda ash method it is two times.
  • Soda ash substitute does not impair fastness properties on the dyeings
  • For neutralization, acid consumption is reduced upto 50 – 60 %.
  • Soda ash substitute is suitable for dyeing in all types of m/c and substrate form.
PRODUCT NAME

Finocon ADA Premium

PROPERTIES / USES

Highly effective soda ash substitute for fixation of all types of Reactive dyes on cellulosics, reducing load on effluent treatment plant due to its lower TDS, BOD & COD.

PRODUCT NAME

Finocon ADAP 100

PROPERTIES / USES

Highly effective 10 times concentrated soda ash substitute in powder form, for fixation of all types of Reactive & sulphur yes on cellulosics yarn, fibre & garments.

PRODUCT NAME

Finocon ADAP 40 / Finocon ADXX Premium

PROPERTIES / USES

Highly effective 4 times concentrated soda ash substitute in powder form, for fixation of all types of Reactive & sulphur yes on cellulosics yarn, fibre & garments.